Injecting In-mould Labels

Applications:

1. Applicable to one-piece PP bottles and HDPE bottles. 
2. Excellent processing capability and lower cost production. 
3. It can be recycles together with the containers made of the same material.
4. Perfect and gloss surface performance. 

Advantages of Synthetic Paper :

In the current injecting process, putting labels into a mold with a robotic manipulator is commonly used to make one-piece products . In addition to saving the time and costs for traditional coated label production, printing and auto-labeling on bottles, this process is helpful for recycling and preventing from imitation. Synthetic paper has excellent characteristics in printing effect, forming operation and cost efficiency and is the best choice for this application. It is especially suitable for printing houses and food manufacturers. 

 Refer to following introduction for injection process .

Process:

1.Roll NPQ、NPP、FBMN grades → UV rotory-flexo or -gravure presswork (outside surface printing)→ pounching → injection mold → product
2.Roll FBMN grades →gravure presswork  (inside printing)→ lamination with OPP film  → pounching → injection mold → product

 











Refer to the In-mold labeling for Injection  Process as below.

;

Referencer:

• Attached: NPL-60 Synthetic Paper.pdf
• Attached: NPP-60 Synthetic Paper.pdf
• Attached: NPP-79 Synthetic Paper.pdf
• Attached: NPQ-60 Synthetic Paper.pdf
• Attached: CDQ-61 Synthetic Paper.pdf
• Attached: NPQ-69 Synthetic Paper.pdf
• Attached: FBMNS Synthetic Paper.pdf
• Attached: Injecting In-mold Labels guide book.pdf